- Drawer Dimensions
x
- Height & Bottom
" +
- Height & bottom
- Insert Dimensions
-0.13 x -0.13
- Template Name
- Fixed Walls Set
- Movable Dividers
About Fixed Walls, Movable and Targeted Dividers
Your custom insert will be made up of 1/2" thick fixed walls and 1/4" thick dividers, which can be either movable or targeted to a single location. The fixed walls create sections within the insert. Typically, the sections are subdivided into compartments by dividers.
As you go through the next steps, you'll be able to specify your insert's layout and the number of dividers in each section. As you add or subtract movable dividers, your overall price will adjust accordingly. You may choose to have an open section with no dividers by zeroing-out the number of dividers in a particular section. These options will be clear as you work through the next steps.
Targeted Dividers
Targeted Dividers are for when adjustability is not wanted or needed, or for when you need for the dividers to be positioned in specific, or "targeted", locations (as was the case with the glassware insert below.)
Targeted dividers...
- will not be adjustable
- will be evenly spaced unless you say otherwise
- will be removable
Targeted dividers can be selected on the final page of the ordering process.
Some Fine Points
See the versatility of a template!
When planning your insert, try to group things into sections. Then find one of our templates that has sections laid out in the same manner. Remember that you get to determine the dimensions of each section.
The following inserts were all created with the same template, named "Jill":
The following inserts were created using the "Linda" template:
